Description

This replaces one the A/C vent right above the slider giving you 3 high intensity LED’s and a switch in a very accessible location. Open the slider, simply reach up and flip a switch to illuminate the area after the slider is opened. Now available with your choice of LEDs: 3 White,  3 Red, or 2 White and 1 Red.

Wiring and fuses are NOT included. USE A PROPERLY SIZED FUSE (NOT SUPPLIED) WHEN INSTALLING!

Included: custom designed 3D printed cover plate made from durable ABS plastic, dual USB’s and a switch.

Please note:

  • USE A PROPERLY SIZED FUSE (NOT SUPPLIED) WHEN INSTALLING!
  • Components are supplied by various manufacturers.
  • This custom-made product is exempt from the right of withdrawal in the EU.

Basic Electrical Schematic:

General Install Instructions:

  • I ran a new fused power wire from the Aux battery up the B Pillar.
  • Unscrew the fasteners holding up the headliner.
  • Run wire across and tuck inside the headliner and into the vent channel above the slider.
  • Remove stock vent above slider.
  • Install a ground screw at a spot close to the Upper Bunk PowerPod®.
  • Connect wiring as per the basic schematic above. (Wiring is really up to you, it depends on how you’d like it to operate.)
  • Test the unit to make sure that it functions as you intend.
  • Reinstall all of the screws that you removed.